• NEWS



Forklift manufacturers: forklift manufacturers forklift maintenance battery nine points

Release time:

Mar 16,2021

Hebei long deyao machinery manufacturing co., ltd. is committed to material handling equipment research, design and development of forklift manufacturers. The main products are pure electric forklift, electric forklift brand, imported electric forklift, full electric forklift, 2 tons of electric forklift, 3 tons of electric forklift, 1 tons of electric forklift, battery forklift, handling forklift and other material handling equipment.
Nine key points for forklift manufacturers to maintain batteries

The forklift manufacturer's battery maintenance can not only save a lot of trouble, but also greatly extend the service life of the forklift. Therefore, it is necessary to abide by the correct operating rules and use it reasonably. The forklift agency of the forklift manufacturer has summarized the following nine key points, which must be kept in mind!

1, forklift manufacturers battery will produce hydrogen, may cause an explosion, it is strictly prohibited to smoke near the battery, it is strictly prohibited to produce any flame or spark. The battery must be stored or charged in a well-ventilated place, but not at the air outlet to avoid corrosion caused by acid mist.

2. The battery liquid contains corrosive liquid, which may cause serious burns. Avoid contact with skin, eyes or clothes. If an accident occurs, please rinse with plenty of water immediately and seek medical treatment quickly.


3, forklift manufacturers in the inspection or maintenance of the battery, please use rubber gloves to avoid electric shock.

4. The battery surface or connection must be kept clean. If there is dust, impurities, etc. on the surface of the battery, the Luoyang Hangzhou forklift agency must be cleaned with a wet cloth, otherwise it will leak electricity and even cause a fire.

5, forklift manufacturers to clean the battery, be sure to use a wet cloth, do not use a dry cloth.

6. Do not connect the positive and negative of the battery with tools, etc.

7, forklift manufacturers charging electrolyte temperature should not exceed 50 degrees Celsius, so as to avoid electrolyte overflow damage, especially in summer during the day.

8. Before unplugging the battery plug, in order to avoid sparks, be sure to turn off the key switch of the forklift and the switch of the charger.

9, forklift manufacturers electrolyte surface should not be lower than the average, otherwise the battery is easy to heat, easy to burn.

From food, agriculture, machinery, building stone, chemical industry, logistics and warehousing, light industrial food, auto parts manufacturing, electronic parts, textile chemistry, instruments and other industries of the national economy, the development of applicable forklift accessories has been gradually realized, which has expanded the use of forklift trucks for forklift manufacturers.