• HOME

  • ABOUT

  • PRODUCT

  • SERVICE

  • NEWS

  • RECRUITMENT

  • CONTACT

The ground cow forklift is widely used, so how should we use the forklift correctly?


Release time:

Mar 23,2021

In our lives, ground cattle forklifts are widely used in warehouses, warehouses, ports, supermarkets and other places, so sometimes it is inevitable to carry some dangerous goods. Therefore, the correct use of forklift is particularly important.

In our lives,ground cowForklifts are widely used in warehouses, warehouses, ports, supermarkets and other places, so sometimes it is inevitable to carry some dangerous goods. Therefore, the correct use of forklift is particularly important. Then we take a look at the matters needing attention

QvhUTv8TQsuSNW1BylkiuQ.jpg

On good roads, the rated lifting capacity of the forklift is2Tons. When operating under bad road conditions, the lifting capacity should be appropriately reduced and the driving speed should be reduced. at a slope exceeding7When handling goods on the slope, the goods should be above the slope. When transporting and planting goods, local cattle forklifts must not slam on the brakes to prevent the goods from slipping out. When handling large-volume goods, the goods block the line of sight, and the forklift should reverse at low speed. When loading goods, the height of the forks should be adjusted according to the size of the goods, and the weight of the goods should be evenly distributed by the two forks to avoid the goods sliding to one side due to partial loading. No one shall use a cattle forklift without the consent of the administrator. In order to extend the service life of the forklift, prevent accidents, keep the forklift in the best operating condition, and the parts are operating normally, the machine must be maintained strictly and regularly during use. Check the fastening of all mechanical joints of the forklift, especially the connecting bolts and locking devices of the steering system, wheels and lifting mechanism.

Usually pay attentionKeep the working environment of the forklift clean and pay attention to the cleanliness of the forklift itself. There are often some sundries, such as wooden pallet fragments, plastic wrap, garbage, rags, production waste, etc. In the working environment of forklift. If these debris are wrapped around the wheels or tires of forklifts, especially the polyurethane tires used on trucks, it will have a profound impact on work efficiency. Therefore, it is necessary to check more and eliminate the influence of these sundries on forklift work in time. Moreover, the floor of the forklift workplace should be cleaned frequently, and even consider using plastic pallets or metal pallets instead of wooden pallets. According to the forklift operation manual, the forklift should not be misoperated. Misoperation will slightly damage the forklift, but it will seriously cause the forklift accident. In order to reduce impact injuries, in too narrow aisles, it should be noted that it is best to arrange well-trained forklift drivers to work in such an environment, and pay attention to the surrounding environment and various indicator lights of the vehicle to avoid collision accidents. Spending more time training your forklift operators and teaching them safety knowledge can reduce the damage rate to the forklift itself and the goods, while greatly reducing the forklift failure rate and accident probability.

Finally, there must be a strict forklift management system. When the forklift is not in use, please remove the key to avoid unnecessary damage caused by other non-operators. Tell the operator that in the process of forklift handling goods, for some narrow aisles, you must get off the car first and measure the width of the aisleConfirmWhether the forklift and the goods can pass safely.