• HOME

  • ABOUT

  • PRODUCT

  • SERVICE

  • NEWS

  • RECRUITMENT

  • CONTACT

Handling forklift truck need to understand the common sense problem


Release time:

Sep 23,2021

The main function of the forklift is to carry goods during operation. The forklift is the logistics equipment for carrying goods. The manual hydraulic truck is a simple, effective and common loading and unloading tool in the pallet transportation tool of the handling station. During handling, the fork it carries is inserted into the pallet hole, and the hydraulic system is driven by manpower to realize the lifting and lowering of the pallet goods, and the handling operation is completed by manpower pulling.

Handling forklift truck need to understand the common sense problem

Forklift in the operation of the main role is to carry goods, forklift is the handling of goods logistics equipment, manual hydraulic truck is the handling station pallet transport tools in simple, effective, common loading and unloading, handling tools. During handling, the fork it carries is inserted into the pallet hole, and the hydraulic system is driven by manpower to realize the lifting and lowering of the pallet goods, and the handling operation is completed by manpower pulling.

Matters needing attention when handling forklift

1. The carrying capacity of the forklift truck is all tonnage, so do not overload when using it;

2. Before using the truck, first check whether the ground conditions allow use;

3. Different working oils should be selected according to different environments, so as not to affect the normal operation of the hydraulic system.

4. Before using the forklift, check whether the structure of each part is normal and whether the connecting parts are loose.

5, the goods should be evenly distributed on the fork surface, not left and right tilt or single fork lifting, in order to prevent damage to the parts or goods overturned after the accident.

6. After the operation is over, the goods should be unloaded and the car should be placed in a low position. It is not allowed to press heavy objects on the fork for a long time.

7. During transportation, the forklift may enter air in the hydraulic system due to inversion, causing the piston rod to rise slowly or the pressure cannot meet the work requirements. The vehicle shall be placed in a low position without load, and the grappling hook shall be pulled at the same time, and it can be returned to normal after several times of reciprocating.

Hebei Longdeyao Machinery Manufacturing Co., Ltd. is located in Xingtai, Hebei Province, which is "the ancient capital of five dynasties and the male county of ten dynasties. The company is committed to the material handling equipment research, design and development of forklift manufacturers. The main products are pure electric forklift, electric forklift brand, imported electric forklift, full electric forklift, 2 tons of electric forklift, 3 tons of electric forklift, 1 tons of electric forklift, battery forklift, handling forklift and other material handling equipment.

The price of Longdeyao electric forklift is reasonable. With its exquisite appearance, reliable performance, good service, and excellent cost performance, it has attracted the attention and favor of customers at home and abroad. We are committed to building Longdeyao forklift into a trusted forklift brand at home and abroad.

Proper maintenance of the warehouse handling forklift will extend the service life of the warehouse handling forklift. During maintenance, the oil, air and lubrication are mainly checked. Try to check the oil level every six months. The new injection of oil into the rubber container should be 5mm below the liquid level, and the goods should be in a low position when adding oil.

When handling a forklift to replace the seal, air may enter the hydraulic system, place the joystick in a low position, and then swing the handle a dozen times. Lubricate the movable part with motor oil or lubricating oil. In addition, it is necessary to pay attention to daily inspection and maintenance. The inspection of the warehouse handling forklift can reduce wear as much as possible. Special attention should be paid to the control of wheels, axles, forks, lifting and lowering. Whenever the work is completed, the forks should be empty and lowered to a low position. There are warehouse handling forklift in the use of the process will inevitably encounter some failures, understanding the common use of failure will greatly improve the efficiency of the use of handling tools.