• NEWS



Some precautions for the use of handling forklifts? How to carry out maintenance?

Release time:

Apr 22,2022

The forklift truck is very convenient to use in our life, which brings a lot of convenience to everyone's life, especially for carrying heavy objects, so our requirements for it are getting higher and higher, so we all know what characteristics it has. What points should be paid attention to in the later maintenance and inspection of the forklift truck? In order to let everyone better understand our handling forklift, the manufacturer of the handling forklift will give you a detailed introduction.

       Handling forkliftIn our life is very convenient to use, to everyone's life has brought a lot of convenience, especially the handling of heavy objects, so our requirements for it is also getting higher and higher, so we all know what characteristics it has, handling forklift later maintenance and inspection need to pay attention to what points.


We should all knowHandling forkliftIt works with electricity, so it is very simple and convenient to use. When we use the forklift in winter, we must do a good job of timely inspection and maintenance. This 1.1 must not be ignored, because if we do a good job in maintaining the forklift, its service life can be extended to a certain extent. It may be more easily damaged.

Because it is winter, there may be bad weather. For these situations, we must pay attention to the speed, not too fast, keep the distance between cars, and avoid emergency braking. Because of neglect of management, handling forklifts will be easily damaged, which brings some inconvenience to our work. Therefore, I would like to remind you that you must maintain the forklift in time, especially in winter.

1. Check the tire pressure: If it is insufficient, add it to the specified value to confirm that there is no air leak. Check whether the ground and sides of the tire are damaged and whether the rim is deformed.

2. Check for leaks, focusing on: pipe joints, brake pumps, lifting cylinders, water tanks, engines, transmissions, drive axles, pressure steering gears, steering cylinders, etc.

3. Check the brake fluid and water volume: check whether the brake fluid is within the calibration range, and check whether the brake pipeline is mixed with air. Prevent dust and water from mixing when adding brake fluid. Use clean tap water when adding water to the tank. If antifreeze is used, the same antifreeze should be returned. When the water temperature is higher than 70 degrees, open the water tank cover. When opening the cover, pad a thin cloth on it, and do not twist the water tank cover with a sleeve.

4. Inspection of polyurethane tires: It is the same to check the road conditions to see if the tires are worn out. When installing tread tires, pay attention to the marking of the rolling direction of the wheels.

5. Inspection of hydraulic oil and electrolysis of electric forklift: first put the oil meter out, wipe the meter head, then insert and pull out, check whether the oil level is between the two scales. The oil level in the working oil tank should be between the two scale lines; if there is too little oil, air will be mixed into the pipeline, and too much oil will overflow from the cover. The battery electrolyte should also be between the upper and lower scale lines. If not enough, add distilled water to the top line.

6. Inspection of brake springboard, inching pedal and hand brake: step on each pedal and check whether there is abnormal slowness or jam. Confirm the safety and reliability of the electric forklift handle.

7. Check the belt, horn, lamp, instrument, etc. Check whether the belt tightness of the electric forklift meets the requirements. If there is no adjustment margin or there is damage or crack, replace it; the speakers, lights and instruments should be normal and effective.

8. Battery maintenance: During the use of electric forklifts, pay special attention to charging the battery in time, battery maintenance, and pay attention to methods when charging the battery, not only to fully charge the battery, but also to avoid overcharging the battery. When the battery is found to be insufficient, it should be charged as soon as possible to prevent excessive battery discharge.

9. When the vehicle is driving, do not mistake the "forward and reverse" direction switch as a steering switch.

10. Doil oil filter deposits.

11. Check the firmness of each part, focusing on: fork bracket, lifting chain fastening learning screw, wheel screw, wheel fixing pin and brake steering gear screw.

12. Check the reliability and flexibility of the steering gear.

13. Clean the dirt, dirt, and dirt on the electric forklift. The key components are: fork frame and gantry slide, generator and starter, battery electrode fork water tank and air filter.