• HOME

  • ABOUT

  • PRODUCT

  • SERVICE

  • NEWS

  • RECRUITMENT

  • CONTACT

5 tons of electric forklift daily inspection and maintenance to how to carry out?


Release time:

Sep 30,2022

The regular inspection and maintenance of the 5-ton electric forklift is an important link to ensure the progress of the work. Check the main parameters and equipment of the electric forklift before use to ensure the accuracy of the electric forklift. What should I pay attention to before using a 5-ton electric forklift!

The regular inspection and maintenance of the 5-ton electric forklift is an important link to ensure the progress of the work. Check the main parameters and equipment of the electric forklift before use to ensure the accuracy of the electric forklift. What should I pay attention to before using a 5-ton electric forklift!

jOu3DLH4T8mzSW57g0Sg0g.jpg

Check whether the tire pressure standard of the 5-ton electric forklift meets the requirements, and whether the gold roof and accessories are complete. In the early stage of application, due to the insufficient grinding of the unsmooth surface of the parts, there are still errors in the appearance and installation position after production and processing, and the gap and wetting standard will continue to be different, causing greater damage and slightly higher working temperature. Use electronic monitoring computer to check, if you can't go to the enterprise to check the information.

Check whether the pipes and joints of each component of the 5-ton electric forklift are damaged, loose, water and oil seepage. Especially whether there is leakage in the hydraulic transmission system, the sub-cylinder of the brake and the wheel cylinder. Check the lubrication of the electric forklift, car engine or DC brushless motor, compare the lubrication points of the electric forklift, and fill up the car oil, oil and grease.

The comprehensive maintenance of the 5-ton electric forklift can make the electric forklift reach a good operating state. Ensure the coefficient of the electric forklift. So, what are the steps of the daily spot check of the 5 ton electric forklift!

1. The electric forklift should be coated with the same brand of brake oil. It is strictly forbidden to splash the brake oil on the paint surface, otherwise it will damage the paint surface. When the electric forklift is filled with brake fluid, prevent dust and water from penetrating into the hydraulic oil.

2. Water leakage check: gear oil, lithium battery electrolyte, brake oil. Check the hydraulic pipe joint, battery and brake system for oil or liquid leakage, touch and estimate by hand, do not use fire.

3. Check whether the tire road is damaged and whether the wear degree of the brake disc exceeds the warning line. When the tire is damaged or exceeds the warning line, it should be removed and replaced immediately.

4. Check the proportion of lithium battery electrolyte with an electric forklift. Check whether the chemical wiring is loose or damaged, otherwise it should be adjusted or replaced.

5. Check the brake pedal. Try the brake pedal. Is the production limit delayed or stuck? Is the accelerator pedal/brake pedal intelligent and reasonable? Check the brake fluid, open the oil mark cover of the brake system, and check whether the brake fluid is within the scale range. If the water bill is not enough, please make it up.

6. Software inspection of electric forklift control system: check whether the lifting rocker arm, inclined rocker arm, adjusting rocker arm and accessory rocker arm are loose and in good condition.

There is 5 tons of electric forklift small size, easy to operate, suitable for small indoor space. However, with the arrival of winter, cold protection measures are very important, so the relevant operators have carried out cold protection measures. After the battery is fully charged, it should be used as soon as possible: Once the electric forklift is found to be exhausted in winter, the battery should be charged immediately to prevent non-power applications.